|
Home > Products > Sensors, Transmitters and Controllers > Flow > Paddle Wheel |
|
|
|
Paddle Wheel Flow Meter |
|
|
|
|
|
Type 8036 - Inline flowmeter with paddle wheel, ELEMENT design |
|
|
|
|
|
 |
|
|
Type Description |
|
|
The paddle wheel device Type 8036 is specially designed for measuring the flow rate in solid-free liquids in a variety of applications (water, waste water monitoring, chemical processing, etc.). The device is made up of a compact sensor-fitting with paddle wheel (Type S030) and a transmitter (Type SE36). The device is quickly and easily assembled thanks to a bayonet mounting and locking system. The Bürkert “Inline quarter-turn” technology ensures a leakage-free operation. The Bürkert-designed sensor-fitting system ensures simple installation of the device into all pipelines from DN 06…DN 65. The device is available either with 2 configurable outputs (1 transistor output (NPN) and (1 current output 4…20 mA, 2-wire), or with 3 configurable outputs (2 transistor outputs (NPN/PNP) and 1 current output 4…20 mA, 2-wire) or with 4 configurable outputs (2 transistor outputs (NPN/PNP) and (2 current outputs 4…20 mA, 3-wire). The device converts the measured signal, displays different values in different units (if the display/configuration module is mounted) and computes the output signals which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops. |
|
|
|
|
|
Features |
|
|
« Size of measurement pipes: DN 06…DN 65 |
|
|
« Configurable outputs: one or two transistor output(s) and one or two 4...20 mA current output(s) |
|
|
« Removable backlit display/configuration module for indication of flow rate and volume with two flow totalizers |
|
|
« Automatic calibration using Teach-In, all outputs can be checked without the need for actual flow |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|